Bondone Clearlam

Bondone Clearlam B

Bondone® Clearlam B is two components modified low viscous epoxy coating system. Excellent coating or lamination can be achieved on most of the substrates including glass, metals, plastics, wood, paper stickers and natural stones. When both components are mixed properly and cured at room temperature, an excellent high gloss coating can be achieved.

Features:

1. Excellent hardness

2. Good adhesion and flexibility

3. High gloss and clarity

4. Thermally stable and suitable to perform in extreme conditions

5. Good water and chemical resistant

Applications:

1. Buckles lamination;

2. Key-chain making

3. metal gift articles

4. Coating and lamination of articles

5. PVC, Paper stickers

Specifications:

1. Mixing Ratio (R:H) Pbw NA 100:50

2. Mix viscosity at 25°C mPas: 400-600

3. Pot life 100 gm at 25ºC Minutes: 18-30

4. Surface dry at 25 °C Minutes: 120-140

5. Touch dry at 25 °C Minutes: 210-230

6. Hard dry at 25 °C Minutes: 380-400

7. Water Absorption%: 0.5 Max.

8. Hardness Shore D: 70-80

Packaging: Bondone® Clearlam B resin is available in 1 kg bottle and 5 kg jerry can and Bondone® Clearlam B hardener is available in 500 gm, 2.5 Kg bottles.

Pre-Treatment: The surface must be thoroughly degreased with a good degreasing solvent (e.g. acetone, toluene or trichloro-ethylene). Ensure all oil, dirt and grease is removed. Alcohol or paint thinner use for such purpose is restricted. Surface can. The mixed mass is applied by brush, spatula or through dispensing bottle on the surface to be coated. The mix must be used within its pot life.

Curing: Once Part A and Part B is mixed, colour change occurs after a set period of time. This is a normal phenomenon and does not affect the cured product properties. Part A and B should be mixed gently otherwise bubble formation will occur. Low temperature leads to long curing schedule and hence heat curing is advisable.

Safety: Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact, it should be washed off immediately with warm water. Avoid breathing vapours, mist or gas. Please refer to the Safety Data Sheet.

Storage Conditions: Part A & B should be stored away from light & heat. Partly emptied containers should be tightly closed immediately after use to avoid exposure to light. For information on waste disposal and hazardous products of decomposition in the event of a fire, refer to the Material Safety Data Sheets (MSDS) for these particular products. Shelf Life The shelf life for both Resin and Hardener is 12 months from date of manufacturing

Bondone Clearlam C

BondOne Clearlam C is a two components, medium viscous, modified epoxy coating | lamination system

Applications:

• Suitable for formulating self levelling top coats

• Coating and lamination of articles

Features – Benefits:

• Good adhesion and flexibility

• Good mechanical properties

• High gloss coatings

SKUs | Packaging Units:

1.6 kg | 8 kg

Application Procedure:

• Clean the surface to be coated thoroughly to make it grease and dust free.

• Mix resin and hardener in ratio of 100:50, mix gently so as to avoid bubble formation.

• Apply uniform coat of mixture over surface of photo lamination.

• Cure using oven at 60 – 70OC for 30 min.

Get in touch

Send inquiry

GIVE US A CALL