Lapox Ultrafast - Cyanoacrylate glue

Lapox Ultrafast

Lapox Ultrafast is one component, solvent free, nearly instant setting, and room temperature curing adhesive. It is a tenacious adhesive, particularly when used to bond non-porous materialsor thosethat contain minute traces of water. It is compatible with wide range of materials like plastics, wood,metals, glass, rubber etc. It is easy to handle and dispense from convenient squeeze-tubepackaging.It is optimal for bonding small parts or assemblies and is adaptable to high speed assembly operations using automatic dispensing.

Applications:

This adhesive is useful in bonding plastic, flex, PVC, leather, rubber, glass, metals etc. componentswhere instant bonding is required.

Features:

1. Rapid curing (less than a minute) at room temperature and no heat required

2. Bond forms with only contact pressure and no clamping required

3. Bonding to a wide variety of substrates including metals, rubbers, most plastics and ceramics

4. Excellent wetting characteristics with no solvent evaporation or hazardous vapor emission

5. Good resistance to weathering

6. Resists many chemicals including gasoline, kerosene & various oils No mixing required and spread easily

7. No special pretreatments required for most of surfaces Ideal for high speed production

8. Cost effective, as minimal amounts of adhesive are needed to form strong bonds

Typical properties:

1. Chemical type - Ethyl cyanoacrylates

2. Appearance (Visual): Clear transparent liquid

3. Colour (Visual): Colourless

4. Curing - Humidity

5. Specific gravity at 25°C - 1.04 - 1.06

6. Viscosity (m Pas): Max 5

7. Flash point °C: 84

8. Solubility - Nitro methanol, Acetone, Dimethylformamide

9. Refractive index - 1.49 (± 0.03)

Processing:

Surface preparation: The adherents must be thoroughly degreased with a good degreasing solvent(e.g. toluene, acetone trichloroethylene). Abraded with coarse emery paper or chemically etched metal surface shows an excellent strength. Inadequately pre-treated substrates maynot bondsatisfactorily.

Application method: Apply the adhesive sparingly to one surface (usually one drop is sufficient), bring the components together quickly and correctly aligned. Apply sufficient pressure to ensure the adhesive spreads into a thin film. Do not disturb or re-align until curing is achieved. Any surplus adhesive can be removed with cleaner. For difficult or porous surfaces activator is recommended. If bonding to polypropylene, polyethylene, PTFE or silicone surface, then prime surface first with polyolefin primer.

Packaging:

Lapox Ultrafast is available in 20 ml HDPE bottles. Other packing may be considered on request.

Storage and handling:

Lapox Ultrafast should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf life of nine months, if stored inits original container between 20°C and 22°C away from humidity and excessive heat. The shelf life dependsonthe storage temperature. Containers should be tightly sealed when not in use. Whenremovinganadhesive container from the refrigerator, allow the adhesive to reach room temperature before using it. Excessively aged or outdated adhesive may appear cloudy or milky, if this occurs the material should not be used. S

Lapox Ultrafast - fast setting glue for marble, wood, leather, ceramic and glass