BondOne Flowtop is a two component epoxy floor coating system.
Features – Benefits:
Clear and stable colour
High gloss
Low viscous
High abrasion resistance
Application Procedure:
Make sure that floor to be coated should be clean, free from dust, grease, oil. Make sure proper pre-treatment is done
Apply BondOne Flowtop Primer: single | double coat based on base surface
Lay down screed using BondOne Flowtop Primer and silica sand, thickness will depend on project requirement
Mix BondOne Flowtop along silica powder and epoxy pigment paste of desired shade, apply uniformly by high speed dispersing mixture
Apply the mixed mass on screed surface and aid self levelling using roller or other tools
Allow to set for 72 hours before starting traffic.
SKUs | Packaging Units:
Resin – 5 kg | 10 kg | 30 kg | 340 kg
Hardener – 2.5 kg | 5 kg | 30 kg
